Most portable electronic devices require some type of battery. Many of the newer devices are based on lithium-ion batteries, but removable batteries like AA or AAA are still in use in products like flashlights and remote controls.

Over time, if the batteries are exposed to moisture may corrode the elements and dirty inside the device. This dirt not only prevents the product to work properly, but it is dangerous for the atmosphere and the environment. With this in mind, it is important to clean the corroded element.

Instructions

1. Remove the batteries corroded device and discard.
2. Dip a towel in white vinegar and clean the battery. If the bin is too small you can use a cotton swab. The acid in the vinegar helps break down corrosion and remove the hardware.
3. Brush the inside of the device with a bottle brush or other brush with wire teeth. The brush scraping the remains of corrosion.
4. Clean the inside of the appliance with water with the locking device. If you are using an MP3 player or other device with internal cables avoid using water because it can damage the entire team. If badly corroded you can use a damp cloth to clean the debris, and then leave the device in a well-ventilated area for a day or two.
5. Dry the equipment with a soft towel and let it sit before trying to put the batteries back. Insert batteries in a controller or other device wet corrosion and cause even more damage.

You need

• White vinegar
• Water
• Towel
• Cotton swab

Advice

• Be sure not to turn on your computer while it is damp or wet. This can make the circuit court.